Settings; How To Set Language; How To Set Current Time And Day Of The Week - Nobel FCD 05 Instruction Manual

7.

SETTINGS

7.1.

How to set language

The programmer LOGO allows to select the language of menu and of messages :
- To set the language of menu, proceed as follows:
1. push the button
2. push the button
3. push the button
4. push the button
5. push the button
6. push the button
7. push the button
8. push twice the button
The programmer is already factory set on "english".
- Set the parameter "B100" on position "ON" to select the italian language of the
messages; set on position "OFF" to select english language of the messages (proceed as
described at chapter 7.5).
7.2.

How to set current time and day of the week

The programmer is equipped with internal clock, keeping exact time for 80 hours in case of
power failure. To set the current time and day, proceed as follows :
9. push the button
10.push the button
11.push the button
12.the pointer indicates "Clock..", push the button
13.the pointer indicates "Set Clock..", push the button
14.push the button
15.when the pointer blinks on the day or the number to be modified, push the button or
until the new desired day or value is shown (symbols related to days of week are
explained at following chapter)
16.repeat the same operation with other values, if required
17.push the button
18.push twice the button
The programmer is already factory set for automatic updating with european summer time
(S/W Time ON = EU)

s.r.l.Milano - ITALY
INSTRUCTIONS MANUAL AUTOMATIC FILTERS
ESC
until the pointer > indicates "Set ..."
.
OK
or until the pointer > indicates "Menu language"
.
OK
or until the pointer > indicates the language desired
to confirm (save) the modifications
OK
to go back to the visualization of service
ESC
ESC
until the pointer > indicates "Set ..."
OK
to point the day or the number to be modified
to confirm (save) the modifications
OK
to go back to the visualization of service.
ESC
FCD-FACD-FFD /DT /DP /DT-DUAL /DP-DUAL
OK
OK
Page 16 of 23 r.4
fcd-dp_mi-r4.doc –