Installation Locations; For Long Operating Life; Other Cautions - Mitsubishi CP-W5000DW Quick Setup Manual

SAFETY PRECAUTIONS
MAINTAIN GOOD VENTILATION
Ventilation slots and holes are provided on the rear and both
sides of this printer. Place the printer on a hard and level
to ensure proper ventilation. When putting the printer on the
SUITABLE LOCATIONS
AVOID PLACES WITH HIGH HUMIDITY AND DUST
Do not place the printer at a high humidity and dusty
locations. They can cause extensive damage to this printer.
fumes and vapors.
AVOID PLACES LIKELY TO BE EXTREMELY HOT
Places exposed to direct sunlight, or near heating
appliances can attain extremely high temperatures, which
may deform the cabinet, or can become a prime cause of
damage.
PLACE THE PRINTER ON A HORIZONTAL LEVEL
conditions or in an unstable places.
UNSUITABLE MATERIALS FOR THE DIGITAL
COLOR PRINTER
is wiped with chemical dusters, benzine, thinner or any other
solvent, if rubber or PVC items are left in contact with the
printer for extended duration, or if the printer is sprayed with
insecticide.
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a
mild soap and water solution. Allow to dry completely before
operating. Never use petroleum base solutions or abrasive
cleaners.
HEAD ABRASION
The thermal head wears out. When it is abraded, it becomes
is necessary to replace the thermal head. Consult with the
sales dealer for replacing the head.
completed. It may degrade the print quality or cause an
error.
exposure to extremely low or high temperatures could
the print images.
may stop printing temporarily during printing. (The LCD
displays "COOLING.") Please wait for the printer to
resume printing.

INSTALLATION LOCATIONS

PROTECT AGAINST DEW FORMATION
be formed. If dew is formed, printing is not possible.
OPERATING AMBIENT TEMPERATURE RANGE
The operating ambient temperature/humidity range is
15°C/20%-86%RH - 30°C/20%-86%RH - 35°C/20%-
some time to start printing.

FOR LONG OPERATING LIFE

CONNECTING DEVICES
Read thoroughly "Operating Precautions" of the instruction
Printer. The power cord must be disconnected after printing
is over.
CAUTION ON RELOCATING
be subjected to impacts. They can be a prime cause for
from the power outlet, and the cables from the connected
devices.

OTHER CAUTIONS

NOTE:
YOUR UNDERSTANDING IS REQUESTED FOR THE
LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN
OCCURRENCE OF A MALFUNCTION.
5
Lower Limit
100
15°C/86%
80
0.0225 Humidity Ratio
60
40
20
15°C/20%
0
10 15 20 25
Temperature (°C)
Empty the front cover bin and the exit waste bin
frequently to prevent jamming the strips at the print
output slot and the waste output slot.
temporarily. The print paper may fall from the tray or
Upper Limit
30°C/86%
35°C/63%
35°C/20%
30 35 40