Reset Button; Use The Reset Button; Led (Light) - ZyXEL Communications WSQ50 User Manual

1.5 Reset Button

If you need to set the Multy X Device back to its default settings, use the Reset button on the rear panel.

1.5.1 Use the RESET Button

Make sure the LED is not blinking white.
1
Press the RESET button for longer than five seconds to set the Multy X Device back to its factory-default
2
configurations. The LED starts to blink red.

1.6 LED (Light)

Look at the LED on the top panel to determine the status of the Multy X Device.
Figure 1 Multy X Device LED
Chapter 1 Get to Know Your Multy X WiFi System
Multy X WiFi System User's Guide
6