Tips; I Want To Charge A Bluetooth Device; I Want To Replace The Net In The Unit; I Want To Connect Multiple Bluetooth Devices And Switch Easily Between Them - Denon Envaya DSB200 Owner's Manual

Contents

Tips

I want to charge a Bluetooth device

• Use a USB cable (sold separately) to connect the Bluetooth device to this unit (vpage 12).

I want to replace the net in the unit

• Remove the grill and attach one of the supplied interchangeable nets (vpage 28).

I want to connect multiple Bluetooth devices and switch easily between them

• Music can only be output from this unit from one Bluetooth device connected using Bluetooth, but three Bluetooth devices can be simultaneously
connected to this unit. To switch easily between connections, connect Bluetooth devices that you use frequently to this unit. To switch playback to a
different Bluetooth device when multiple Bluetooth devices are connected, stop playback on the device that is currently playing back, and then start
playback on a different Bluetooth device (vpage 19).

I want to connect an NFC compatible device using NFC

• Enable the NFC function on the NFC compatible device, and touch the NFC device to the N mark on this unit (vpage 18).

I want to turn this unit's power on by operating a Bluetooth device

• Playback music on a Bluetooth device that is connected using Bluetooth to this unit. In this case, turn this unit's eco standby mode off (vpage 13).

I want to reduce the power consumption to the minimum during standby

• Turn the eco standby function on (vpage 13). When this function is turned on, you cannot turn the power supply to this unit on by operating a
Bluetooth device.
Preparation Connections Playback Troubleshooting
23
Appendix
Index