Turn The Power On; Switching The Power To Standby - Denon Envaya DSB200 Owner's Manual

Contents

Turn the power on

1
Press and hold X until an electronic sound is heard.
The illumination LED lights and the power supply switches on.
%
• When this unit is paired with a Bluetooth device, the power supply of this unit can
be turned on by operating the paired Bluetooth device.
• When this unit is running on battery power, the illumination LED switches off after
approximately 5 seconds.
Preparation Connections Playback Troubleshooting

Switching the power to standby

1
Press and hold X for approx. 3 seconds.
The LED of the Bluetooth button or AUX button goes out, and the
power switches to standby.
2 Eco Standby Function
The power consumption in standby mode can be reduced to the
minimum level by using the eco standby function.
However, when the eco standby function is enabled, the power of this
unit cannot be switched on by operating a Bluetooth device. When
using the eco standby function, press the X button on this unit to turn
the power on.
The eco standby function is turned off in the factory settings.
1
Press and hold X for approx. 6 seconds.
The power indicator blinks twice and this unit switches to eco
standby.
13
Appendix
Index