Case 3: Nfc Connection To A Bluetooth Device Equipped With; The Nfc Function - Denon Envaya DSB200 Owner's Manual

Contents
Case 3: NFC connection to a Bluetooth
device equipped with the NFC
function
Simply touch this unit with the Bluetooth device. The power supply to this
unit automatically turns on and the Bluetooth device can pair or connect
to this unit.
1
Turn the NFC function of the Bluetooth device on.
• For details, see the Owner's Manual of the Bluetooth device.
2
Touch the NFC antenna section of the Bluetooth device
onto the N mark on this unit.
The power supply to this unit turns on, the Bluetooth button blinks
and the device starts to connect by Bluetooth.
When a device is connected by Bluetooth, an electronic sound is
heard and the Bluetooth button changes from blinking to lit.
• Follow the Bluetooth device instructions to complete the
operation.
Preparation Connections Playback Troubleshooting
3
Playback music on the Bluetooth device.
Music from the Bluetooth device is output from this unit.
%
• When a Bluetooth device that is playing back music touches the N mark on
this unit, the music starts being output from this unit.
• When the N mark is touched again during Bluetooth connection, the
Bluetooth connection is disconnected.
• If a different Bluetooth device is touched to the N mark while this unit is
connected to a Bluetooth device, playback from the previously connected
Bluetooth device stops and this device connects to the most recently
touched Bluetooth device.
Note
• When connecting using the NFC connection, release the lock function on the
Bluetooth device.
18
Appendix
Index