Table of Contents
Advertisement
RADius 1000 Installation Manual, rev. 5
1.
INTRODUCTION
1.1
About this manual
This manual contains the information necessary to install the RADius 1000 on a vessel. For
all other product information, please consult the RADius 1000 User's Manual, reference [2].
This manual is organised into the following chapters:
Chapter 1 Introduction - A brief presentation of the RADius 1000 Installation Manual with
references and abbreviations.
Chapter 2 Specifications - Describes the physical dimensions, required power,
environmental and cable specifications.
Chapter 3 Installation - Presents procedures to be followed for a typical ship installation
with recommendations on location of the different parts, mechanical and electrical
installation and how to set up the product.
Chapter 4 Installation drawings - Contains outline drawings showing the mechanical
dimensions of the different parts of the RADius 1000.
Chapter 5 Parts list - Lists the parts in the RADius 1000 system.
In this manual the following notations are used:
WARNING! Used when it is necessary to warn personnel that a risk of injury
or death exists if care is not exercised.
Caution!
Used to warn the reader that a risk of damage to the equipment exists if
care is not exercised.
Note!
Used to draw the reader's attention to a comment or some important
information.
1.2
FCC part 15 statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a marine and/or
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. The equipment is not intended for operation in
1
Introduction
Hide quick links:
Advertisement
Table of Contents
