Installing Cacheassure (Expresssas R6Xx Only); Non-Volatile (Nv) Memory Card Installation - ATTO Technology ExpressSAS H1208 HBA Installation And Operation Manual

Installing CacheAssure (ExpressSAS R6xx only)

Adding CacheAssure to your adapter (marked 'A' in Exhibit 5-1) requires the installation of two modules; Non-
Volatile Memory Card (B) and Power Module (C).
WARNING
ATTO CacheAssure modules and adapters
contain components that are sensitive to
electrostatic discharge (ESD). ESD can
cause damage to the ATTO ExpressSAS
adapter. Please follow standard methods to
avoid ESD.

Non-Volatile (NV) Memory Card Installation

1 Power down the computer and unplug the
computer from all power sources.
2 Open the case.
If you have purchased the ESAS RAID
adapter bundled with CacheAssure, the NV
Memory Card is pre-assembled to the RAID
adapter. If so, please go directly to the
Power Module Installation
are adding CacheAssure to a previously
purchased SAS RAID adapter, continue to
step 3.
3 Gently remove your ATTO 6Gb SAS adapter
from the PCI Express expansion slot. If you
have questions about how to remove an
expansion card from your system, consult your
computer's documentation.
4 Remove the NV Memory Card from its
electrostatic safe packaging.
Exhibit 5-1 ESAS RAID adapter with CacheAssure
5
Exhibit 5-2 NV Memory Card Installation
section. If you
Holding the RAID adapter firmly, plug the NV
Memory Card into the RAID adapter with ATTO
logos in matching direction and the standoff
mounts closer to the adapter's bracket. See
Exhibit 5-2.
CAUTION CAUTION
Make sure the NV Memory Card is evenly
aligned on both sides. If the card is
placed incorrectly, damage to the
Memory or adapter may occur. This may
void your warranty.
19