Table of Contents
Advertisement
5
Insert the ATTO ExpressSAS adapter into any
open PCI Express expansion slot. If you have
questions about how to install an expansion
card in your system, consult your computer's
documentation.
18 ATTO Technology Inc. ATTO ExpressSAS Host & RAID Adapter Installation and Operation Manual
6
Close the case on the computer and power it
up.
7
Installed drivers are loaded.
For Windows Server 2003
• Windows detects your ExpressSAS adapter
and the Found New Hardware wizard
appears. Proceed through the wizard with
the default settings for each adapter
channel. Insert the ExpressSAS installation
disk when prompted.
• After adapter installation is complete, the
Found New Hardware wizard shows an
ATTO Phantom Device for each channel.
Proceed through the wizard with default
settings to complete the installation.
For Windows 8, 7, Vista and Server 2012, 2008
• Windows detects your adapter and
automatically installs the required drivers.
If drivers do not load, refer to page 9 for driver
installation and troubleshooting.
8
Turn off power to the computer.
Advertisement
Table of Contents
