Ulm200Usb Controls; Getting Started; Specification - Behringer ULM202USB Manual

High-performance 2.4ghz digital wireless microphone with usb receiver

Hide thumbs Also See for ULM202USB:

Table of Contents

ULM200USB Controls

Type of product : Wireless Microphone

ULM200USB Controls

1. POWER/STATUS LED

VOLUME Button (Mute/volume down)

VOLUME Button(Power on/unmute/volume up)

USB connector

Wireless Link Status LED

ULM200USB Getting Started

1. Press and hold the

2. Connect the ULM100D wireless dongle to the wireless only USB connector on the wireless

enabled device or to a USB port on a computer. The ULM200M will sync to the reveiver

automatically.

3. Use the

and

4. Press and hold the

5. Press the

button to un-mute the volume of the ULM200M.

6. Disconnect the ULM200D wireless dongle. The ULM200M wireless microphone will power

off when no wireless signal is detected for more than 1 minute. To ensure longer battery life,

unplug the ULM200D wireless dongle after use.

RF output

button to power on the ULM200M wireless microphone.

buttons on the ULM200M wireless mic to adjust the volume.

buttons to the mute the volume of the ULM200M.

+10dBm (10mW Max)

Table of Contents

Do you have a question about the ULM202USB and is the answer not in the manual?