Do you have a question about the ULTRALINK ULM200USB and is the answer not in the manual?
Questions and answers
Daniel WOODS
May 8, 2025
retuning microphone to doggle
1 comments:
Mr. Anderson
May 19, 2025
To retune (re-pair) the Behringer ULM200USB microphone with the ULM200D receiver:
1. Ensure the microphone is powered off. 2. Press and hold both ▲ and ▼ buttons on the ULM200M microphone at the same time. 3. Move the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver. 4. The LED on the microphone will blink slowly during pairing and stay solid when paired successfully.
If pairing fails, the microphone will power off automatically after 10 seconds.
High-performance uhf wireless in-ear monitoring system (57 pages)
Summary of Contents for Behringer ULTRALINK ULM200USB
Page 1
Quick Start Guide ULTRALINK ULM200USB/ULM202USB High-Performance 2.4 GHz Digital Wireless System with Handheld Microphone(s) and Dual-Mode USB Receiver...
ULM200USB/ULM202USB Controls Model: ULM200M Model: ULM200D (2) (3) Type of product: Wireless Microphone ULM200USB/ULM202USB Controls POWER/STATUS LED VOLUME Button (Mute/volume down) VOLUME Button (Power on/unmute/volume up) USB connector Wireless Link Status LED ULM200USB/ULM202USB Getting Started Connect the ULM200D wireless receiver to the “WIRELESS ONLY!”...
5270 Procyon Street Las Vegas, NV 89118 Phone Number: +1 702 800 8290 ULTRALINK ULM200USB/ULM202USB complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
3-Year Warranty Program* Our state-of-the-art transmitters and receivers Conceived and designed by BEHRINGER Germany operate in the 2.4 GHz frequency band, which is well out of the way of TV stations and cell phone towers, two of the main culprits that wreak havoc in the wireless zone.
Product Information Document Wireless Microphone Systems ULTRALINK ULM202USB High-Performance 2.4 GHz Digital Wireless System with 2 Handheld Microphones and Dual-Mode USB Receiver Extended Battery Life Replacing batteries in wireless mics can get expensive really fast – and having them die in the middle of your set can be a real showstopper! That’s why we devoted extra time in developing the ULM202USB to ensure that battery life was extended as much as possible.
Page 10
Dual-Mode USB Receiver Extraordinary Value The ULM202USB Wireless Microphone System is only available from BEHRINGER, the premier audio manufacturer recognized worldwide for outstanding build quality and exceptional value. Visit your local authorized dealer today and see just how easy – and aff ordable it is to hop on the ULM202USB wireless bandwagon.
Page 11
Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB.GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC-HELICON, BEHRINGER, BUGERA, DDA and TC APPLIED TECHNOLOGIES are trademarks or registered trademarks of LAB.GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC-HELICON, BEHRINGER, BUGERA, DDA and TC APPLIED TECHNOLOGIES are trademarks or registered trademarks of...
Need help?
Do you have a question about the ULTRALINK ULM200USB and is the answer not in the manual?
Questions and answers
retuning microphone to doggle
To retune (re-pair) the Behringer ULM200USB microphone with the ULM200D receiver:
1. Ensure the microphone is powered off.
2. Press and hold both ▲ and ▼ buttons on the ULM200M microphone at the same time.
3. Move the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver.
4. The LED on the microphone will blink slowly during pairing and stay solid when paired successfully.
If pairing fails, the microphone will power off automatically after 10 seconds.
This answer is automatically generated