Hilti TE DRS6-A Original Operating Instructions page 14

3.2 Intended use
The product described is a cordless (battery-powered) rotary hammer. It is designed for hammer drilling in
concrete and masonry, for drilling in steel, wood and masonry and for driving in and removing screws. The
product can also be used for light chiseling work on masonry and surface finishing on concrete.
For use where dust must be kept to an absolute minimum, Hilti offers the TE DRS-6-A (2) dust removal
module and the DCD dust collection module as accessories.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
3.3 Lithium­ion battery status display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED blinks.
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
3.4 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com.
4 Technical data
4.1 Rotary hammer
Rated voltage
Weight
Rated speed under no load
Single impact energy
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in wood (solid)
Drilling diameter range in wood (solid)
Drilling diameter range in metal (solid-head drill bit)
Drilling diameter range in metal (solid-head drill bit)
Meaning
• Charge status: 75 % to 100 %
• Charge status: 50 % to 75 %
• Charge status: 25 % to 50 %
• Charge status: 10 % to 25 %
• Charge status: < 10 %
TE 6­A36
36 V
8.2 lb
(3.7 kg)
1,050 rpm
2.5 J
1/8 in ... 3/4 in
5 mm ... 20 mm
1/8 in ... 3/4 in
3 mm ... 20 mm
1/8 in ... 1/2 in
3 mm ... 13 mm
5