Searching And Playing Tracks; Repeat Play And Shuffle Play; Operating An Ipod Directly; Searching A Track By Name - Sony CDX-G2050UI Operating Instructions Manual

1
Connect an iPod/USB device to the
USB port (page 6).
Playback starts.
If a device is already connected, to start
playback, press SRC to select [USB] ([IPD]
appears in the display when the iPod is
recognized).
2
Adjust the volume on this unit.
To stop playback
Press and hold OFF for 1 second.
To remove the device
Stop playback, then remove the device.
Caution for iPhone
When you connect an iPhone via USB, phone
call volume is controlled by the iPhone, not
the unit. Do not inadvertently increase the
volume on the unit during a call, as sudden
loud sound may result when the call ends.

Operating an iPod directly

(Passenger control)
Press and hold MODE during playback to
display [MODE IPOD] to enable operation by
the iPod directly.
Note that the volume can be adjusted only
by the unit.
To exit passenger control
Press and hold MODE to display [MODE
AUDIO].
Searching and Playing
Tracks

Repeat play and shuffle play

1
During playback, press
for repeat play, or SHUF for shuffle
play.
2
Press (repeat) or SHUF repeatedly
to select the desired repeat or
shuffle play mode.
Playback in selected play mode may take
time to start.
Available play modes differ depending on
the selected sound source.
Searching a track by name (Quick-
BrowZer™)
1
During CD or USB playback, press
(browse)* to display the list of
search categories.
When the track list appears, press
(back) repeatedly.
* During playback, press
than 2 seconds to directly return to the
beginning of the category list.
2
Rotate the control dial to select the
desired search category, then press
it to confirm.
3
Repeat step 2 to search the desired
track.
Playback starts.
To exit the Quick-BrowZer mode
Press (browse).
(repeat)
(browse) for more
9
GB