System Requirements; Fireboxv System Requirements - Watchguard Firebox T10 Release Note

Fireware and WSM v11.12.1 Operating System Compatibility
1.
Active Directory support includes both single domain and multi-domain support, unless otherwise noted.
2.
RADIUS and SecurID support includes support for both one-time passphrases and challenge/response
authentication integrated with RADIUS. In many cases, SecurID can also be used with other RADIUS
implementations, including Vasco.
3.
The Shrew Soft client does not support two-factor authentication.
4.
Fireware supports RADIUS Filter ID 11 for group authentication.
5.
Both single and multiple domain Active Directory configurations are supported. For information about the
supported Operating System compatibility for the WatchGuard TO Agent and SSO Agent, see the current
Fireware and WSM Operating System Compatibility table.
6.
Active Directory authentication methods are supported only through a RADIUS server.

System Requirements

Minimum CPU
Minimum Memory
Minimum Available
Disk Space
Minimum
Recommended
Screen Resolution

FireboxV System Requirements

With support for installation in both a VMware and a Hyper-V environment, a WatchGuard FireboxV virtual
machine can run on a VMware ESXi 5.5, 6.0, or 6.5 host, or on Windows Server 2012 R2 or 2016, or Hyper-V
Server 2012 R2 or 2016.
The hardware requirements for FireboxV are the same as for the hypervisor environment it runs in.
Each FireboxV virtual machine requires 5 GB of disk space. CPU and memory requirements vary by model:
FireboxV Model
Small
Medium
Large
Extra Large
System requirements for XTMv are included in Fireware Help.
8
If you have WatchGuard System
Manager client software only
installed
Intel Core or Xeon
2GHz
1 GB
250 MB
1024x768
vCPUs (maximum) Memory (recommended)
2 1024 MB
4 2048 MB
8 4096 MB
16 4096 MB
If you install WatchGuard System
Manager and WatchGuard Server
software
Intel Core or Xeon
2GHz
2 GB
1 GB
1024x768
WatchGuard Technologies, Inc.