Advertisement
Increase Quality Through Interaction with the Field
6. REMOVE THE POWER SUPPLY
Remove the two (2) screws that fasten down the
power supply.
7. REMOVE THE MOTOR HOLD DOWN BRACKET
8. REMOVE THE IONIZER NEEDLE AND BRACKET
Remove one (1) screw from the ionizer needle bracket.
Remove the needle and bracket.
9. REMOVE THE IONIZER POWER SUPPLY AND MOTOR
10. REMOVE THE LOWER MOTOR MOUNTS
Increase Quality Through Interaction with the Field
Remove the four (4) screws from the bracket.
Remove the bracket.
Remove the two (2) upper motor mounts
Remove one (1) screw from the ionizer power
supply.
Gently remove the switch panel, transformer, power
supply, motor and ionizer power supply with needle
from the lower housing.
9
Advertisement
