Increase Quality Through Interaction with the Field
Off
•
Fit the pre-filter and new odor absorber to the precipitator cell
•
Install the cell.
•
Fix the grill in place and tighten the retaining screw.
•
Recheck all switch functions for proper unit operation.
•
Clean the exterior using Oreck Foam Cleaner 32252 or equivalent. Don't spray any
cleaning product into louver area (may result in stray static arcing).
Nothing Works
1. Set the Multimeter to Ohms
2. Find the unit's plug. Touch a probe to the large blade and the other to the small blade
(Polarity doesn't matter here).
3. If the unit is off, you should get an ∞ reading.
Increase Quality Through Interaction with the Field
On
Other Service Considerations
Touch the test probes together and adjust for a 0 indication.
Ionizer Needle
Located in the fan
chamber on a bracket on
the right side of the back
wall.
.
13