Oreck ProShield Air Purifier User Manual

Oreck ProShield Air Purifier User Manual

Oreck air cleaner user manual

Advertisement

User's
Guide
Important!
Read this manual
carefully, and
keep for future
reference.
Air Purifier
Oreck ProShield Air Purifier and
Oreck ProShield Plus Air Purifier
®

Advertisement

Table of Contents
loading

Summary of Contents for Oreck ProShield Air Purifier

  • Page 1 Air Purifier User’s Guide Important! Read this manual carefully, and keep for future reference. Oreck ProShield Air Purifier and Oreck ProShield Plus Air Purifier ®...
  • Page 2 Welcome To speak with an Oreck representative call: Call Click Visit features of both the Oreck ProShield Air Purifier and to our Call. Click. Visit. customer service program. USA: 1 • • • Canada: 1 •...
  • Page 3: Table Of Contents

    General Warnings ......1 Placement Warnings ..... . 1 Features .
  • Page 4: Safety

    Safety General Warnings • Only use the air purifier as described in this manual. Failure to do so may result in serious injury or death. • Do not use the air purifier with a damaged cord or plug. Doing so may result in electric shock, serious injury or death.
  • Page 5 CAUTION! • Do not place open flames, including candles, directly in front of the air purifier. • Keep objects away from the air intake grille. It is important to consider the following when deciding on where to locate the air purifier: •...
  • Page 6: Features

    Oxygenator which cannot be removed. Power Cord: Plug into the outlet to begin use. Simply stand the unit on its base with the Oreck logo facing front and the control panel buttons at the top. when the night light is activated. On the Oreck ProShield...
  • Page 7 17. Front Grille: Air enters here for the first stage of cleaning. 18. Remote Control: Remotely turns the Power ON/OFF Oreck ProShield Plus Air Purifier: This model has no Air Revitalizer but instead this button turns the internal UV lights on or off as desired. If turned off, the unit will continue to filters particles from the air but its odor and VOC removal capability will be greatly reduced.
  • Page 8: Operation

    Operation 1. Place. Locate the air purifier on a hard surface such as a table or desk. The unit can be placed horizontally or vertically depending on your space. Be sure the grille is not blocked by other objects and there are no candles or flames near the unit.
  • Page 9: Cleaning

    Remove the unit from the wall if it is wall mounted. Method Wipe with damp cloth first. If required, follow with mild, non-abrasive cleaner. Spray Oreck Assail-a-Cell cleaner or soak in warm water or warm water with mild liquid detergent. Rinse and dry thoroughly. Rinse thoroughly in warm water or as needed.
  • Page 10: Cleaning The Pre-Filter

    Cleaning the Pre-Filter air purifier will not run if the Top Cover is not closed securely. 1. Unplug the air purifier and lay it on its side with the hinged cover on top. 2. Open the Top Cover by pressing the Cover Release button. 3.
  • Page 11 5. Spray Oreck Assail-a-Cell and cover each surface. Allow the cleaner to soak for a few minutes but do not let it dry. Thoroughly rinse the Truman Cell with clean water.
  • Page 12: Cleaning The Exhaust Grille

    Cleaning the Catalytic Oxygenator Unplug the air purifier and lay it on its side with the hinged cover on top. 2. Open the Top Cover by pressing the Cover Release button. Remove the Odor Absorber, Pre-Filter, and Collector Cell. Vacuum the front face of the filter with a soft-brush attachment only.
  • Page 13: Maintenance

    Replacing the Optional Odor Absorber Note: The Odor Absorber can be removed and replaced in the Oreck ProShield Air Purifier only. 2. Open the Top Cover by pressing the Cover Release button. 3. Flip up the two tabs located on top of the Odor Absorber.
  • Page 14: Troubleshooting

    Trouble- Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. shooting All other servicing should be done by an Oreck authorized service center. Problem Unit does not •...
  • Page 15 Check Odor Absorber light. • Vacuum odor absorber with a soft brush attachment if dirty. Do not use any liquids to clean the Odor Absorber. • Replace odor absorber if desired. Contact Oreck for service. Solution...
  • Page 16: Warranty

    God, the use of voltages other than on the data plate of this product or service of this product by other than Oreck or a participating Factory Authorized Service Center.
  • Page 18 © 2009 Oreck Holdings, LLC. All rights reserved. All marks, text, logo’s, product configura- tions and registered trademarks are owned and used under the authority of Oreck Holdings, LLC...

This manual is also suitable for:

ProshieldProshield plus

Table of Contents