Advertisement
Increase Quality Through Interaction with the Field
9. Check the Structural Integrity of the Cell
a. Remove the cell from the unit
b. Remove the Pre-filter from the Precipitator cell and place in a soap bath. Gently
clean, rinse and dry.
c. Remove Odor (Carbon) Absorber and discard.
d. Pre-charge wires should be stretched tight (may have a slight wavy look if it doesn't
cause arcing)
e. Plates should be flat and evenly spaced
f.
End Cards and spacers should be free of burns and distortions.
g. Discard the precipitator cell if pre-charge wires are broken or plates are bent beyond
reasonable repair or end cards/spacers are burnt beyond repair.
e. Wash out the precipitator cell and fan. Gently clean with Assail-A-Cell or other
recommended cleanser, rinse with fresh water and dry.
10. Clean
Skip the Thorough Washing Instruction (See 6b) and go to step g if the unit doesn't
require a thorough washing.
Use a vacuum cleaner to remove dust and debris from the Precipitator Cell cavity, fan,
louvers and exhaust grill.
Increase Quality Through Interaction with the Field
Spacer
Pre-charge wires
End Card
11
Advertisement
