Introduction; Safety Information; Product Information; Specification - Flash BEAM 2R Moving Head User Manual

1

INTRODUCTION

Thank you for purchasing BEAM 2R Moving Head. For safety reasons and to ensure the trouble-free
operation, carefully read the instructions.
2

SAFETY INFORMATION

1. CAUTION ! Avoid looking directly into the light source (meant especially for epileptics)!
2. CAUTION ! Keep away from fire!
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
6. WARNNING! Minimum distance of inflammable materials from the surface: 12m.
7. To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
8. Do not spill water or other liquids into or on to your unit.
9. During long periods of non-use, disconnect the units main power.
10. It should be installed in a well-ventilated place, at a distance of 15cm or more with the walls.
At the same time, please check if the fan and ventilation holes are unobstructed.
11. Disconnect the power supply before installation.
12. Never plug this unit in to a dimmer pack.
The product has perfect performance and integrity packing. All users should be strictly comply with the
warning and operating instructions as stated. Or we aren't in charge of any result by misusing. Any damage
resulting by misuse is not within the company's warranty.
WARNING! THE BULB IS HOT!
Please turn off or restart the device only after 20 minutes after turning off the lamp, once it is fully cooled
down. Frequent switching will reduce the life span of lamps and bulbs.
CAUTION! The head and yoke must be unlocked before operation! Check the pan/tilt locks!
3

PRODUCT INFORMATION

3.1

Specification


Power consumption: 150W

Power supply voltage: 100 - 240V

Voltage frequency: 50/60Hz

Lamp type: 2R

Display: Color LCD

Color: Color wheel - 13 colors + white

ZOOM: No

Beam angle (min): 3,8°

Beam angle (max): 3,8°

Dimming: Linear: 0 - 100%

Prism: 8-facet, rotating

FROST filter: Yes

FOCUS: Electronic
www.flash-butrym.pl
2