Table of Contents
Advertisement
Available languages
Available languages
Features
Top Panel
16
16
15
15
14
14
13
13
1.
Mini-USB Port: Plug the included mini-USB cable into this port and into the USB port of your computer to power
DJ2GO2. DJ2GO2 is class-compliant, so it is "plug-and-play" – no separate driver installation is necessary.
2.
PFL / Cue: Sends pre-fader audio to the Cue channel for monitoring.
3.
Cue Gain: Adjusts the audio level of the Cue channel.
4.
Master Gain: Adjusts the output volume of the Program mix.
5.
Browse Knob: Turn this knob to scroll through a list of tracks and directories/folders in the software. Press this knob to
enter a directory/folder.
6.
Load 1 / Load 2: Press one of these buttons while a track is selected to assign it to Deck 1 or Deck 2, respectively.
7.
Channel Gain: Adjusts the audio level for the corresponding channel.
8.
Crossfader: Blends audio playing between Decks 1 and 2. Sliding this to the left plays Deck 1 and sliding to the right
plays Deck 2.
9.
Pad Mode: This determines the function of the 4 pad bank buttons. The 4 options are: Hot Cue, Auto Loops, Manual
Loops, and Sampler.
10.
Jog Wheel: Move the wheel to control the playback position and scroll throughout the current song.
11.
Play / Pause: Starts or resumes playback if the Deck is paused. Pauses playback if the Deck is playing. The LED will
be OFF when there is no track loaded. The LED will flash when a track is paused. The LED will be ON when a track is
playing.
12.
Buttons 1-4: These buttons send momentary MIDI messages based on the set Pad Mode.
13.
Cue: The Cue button will return and pause the track at the last set cue point. For temporary play of the cue point, hold
down the Cue button. The track will play for as long as the button is held down and will return to the cue point once it
has been released. Hold down Cue and Play / Pause simultaneously to start playback from the cue point. Release both
buttons to allow playback to continue.
14.
Sync: Press to automatically match the corresponding Deck's tempo with the other Deck's tempo.
15.
Pitch Fader: Controls the track's playback speed.
16.
1/8" (3.5 mm) Main Output: Connect this audio output to a mixer, powered speakers, or an audio recorder.
17.
1/8" (3.5 mm) Headphone Output: Connect your headphones to this audio output.
Operation
Pad Mode Controls
1.
Cues: This Pad Mode button switches between Hot Cue Mode.
2.
Auto Loop: This Pad Mode button switches Buttons 1-4 to trigger loops (loop bar value is set in your software).
Pad 1 - 1 beat
Pad 2 - 2 beats
Pad 3 - 4 beats
Pad 4 - 8 beats
3.
Manual Loop: This Pad Mode button switches Buttons 1-4 to manually control looping.
In Manual Loop mode:
Pad 1 - Loop In Set Point
Pad 2 - Loop Out Set Point
Pad 3 - Loop On/Off
Pad 4 - Retrigger Loop
4.
Sampler: This Pad Mode button switches Buttons 1-4 to Sampler Mode to trigger samples.
4
4
7
10
10
2
12
12
4
11
11
5
7
6
6
9
PAD MODE
8
3
10
10
2
12
12
4
14
14
13
13
1
15
15
17
17
11
11
Hide quick links:
Advertisement
Table of Contents
