Numark DJ2GO2 TOUCH User Manual
Hide thumbs
Also See for DJ2GO2 TOUCH:
- User manual ,
- Quick start manual (2 pages) ,
- User manual (29 pages)
Related Manuals for Numark DJ2GO2 TOUCH
Summary of Contents for Numark DJ2GO2 TOUCH
- Page 1 User Guide English ( 2 – 5 ) Guía del usuario Español ( 6 – 9 ) Guide d’utilisation Français ( 10 – 13 ) Guida per l’uso Italiano ( 14 – 17 ) Benutzerhandbuch Deutsch ( 18 – 21 ) Appendix English ( 22 )
- Page 2 Speakers Computer Headphones Before you can begin using DJ2GO2 Touch with your computer, you must install a DJ software application on your computer. With a DJ software application installed on your computer, connect DJ2GO2 Touch to an available USB port on your computer. (If possible, use a USB port on the rear panel of your computer.)
- Page 3 Top Panel Mini-USB Port: Plug the included mini-USB cable into this port and into the USB port of your computer to power DJ2GO2 Touch. DJ2GO2 Touch is class-compliant, so it is "plug-and-play" – no separate driver installation is necessary. PFL / Cue: Sends pre-fader audio to the Cue channel for monitoring.
- Page 4 Operation Pad Mode Controls 1. Cues: This Pad Mode button switches Buttons 1-4 to Hot Cue Mode. 2. Auto Loop: This Pad Mode button switches Buttons 1-4 to trigger loops (loop bar value is set in your software). Pad 1 - 1 beat Pad 2 - 2 beats Pad 3 - 4 beats Pad 4 - 8 beats...
- Page 5 (Manual) Move the pitch slider so the BPM in the software matches with Deck 1. Press play on the downbeat, then use the wheel to align the beats together. Move the crossfader on DJ2GO2 Touch toward the right to crossfade from Deck 1 to Deck 2.
Need help?
Do you have a question about the DJ2GO2 TOUCH and is the answer not in the manual?
Questions and answers