Page 1
PROFESSIONAL DJ MIXER Quick Start Owner’s Manual BOX CONTENTS • MIXER • POWER SUPPLY Manual de inicio rápido para el usuario (ESPAÑOL) CONTENIDOS DE LA CAJA • MEZCLADOR • FUENTE DE ALIMENTACIÓN Schnellbedienungsanleitung (DEUTSCH) SCHACHTELINHALT • MISCHPULT • STROMKABEL Manuel d’utilisation du propriétaire (FRANÇAIS) CONTENU DE LA BOÎTE •...
Page 2
(i.e. turntables or CD players) • your mixer • last, any amplifiers 10. When turning off, always reverse this operation by, • turning off amplifiers • your mixer • last, any input devices 11. Go to http://www.numark.com for product registration.
Page 3
Turn the mixer remove the screws holding it in position. Replace on before you turn on amplifiers and turn of the fader with a quality authorized replacement from amplifiers before you turn off the mixer. your local Numark retailer.
Page 4
DXM06 Effects section FX Assign: Move the toggle to select the channel you would like to process. FX ON: Activates and deactivates the effects FX Select: The effects can be applied to MIC/AUX, CH1, CH2, or MASTER. When FX Assign is set to MIC/AUX, you can select from the 6 FX written in small text along the bottom row (Vocoder, Tape echo, Echo, Reverb 1, Reverb 2, LMT+DSTR).
Page 5
Channel FX: 2XCOPY*: A copy of the signal is delayed by a defined time. The WET/DRY fader will act like a sharp contour crossfader, fading between the original (MIX/INTENSITY fader down) and the delayed (MIX/INTENSITY fader up). Pro DJs will often keep 2 copies of a record so they can do beat juggling tricks like this.