Polaris 600 Fusion Owner's Manual page 132

M-10 Suspension Troubleshooting
Problem
Rear suspension bot-
toms too easily
Rides too stiff in rear
Machine darts from
side to side
Front end pushes
Steering is heavy
Solution
• Increase FRA position (see setup decal under hood for ini-
tial position.
• Install appropriate optional center retainer on rear track
shock (see page 55).
• Increase front track shock coil spring preload.
• Revalve rear track shock compression damping (see your
dealer).
• Check track tension (see page 114).
• Decrease FRA position (see setup decal under hood).
• Install appropriate optional center retainer on rear track
shock (see page 55).
• Decrease front track shock coil spring preload.
• Revalve rear track shock compression damping (see your
dealer).
• Check track tension (see page 114).
• Make sure skis are aligned properly.
• Make sure spindles and all steering components turn freely.
• Check for excessive play in steering assembly (see your
dealer).
• Make sure skags are straight on skis.
• Set static sag (see page 52).
• Ensure use of Accu-Trak dual skags.
• Check for worn skags.
• Check for binding suspension shafts and grease all pivot
points.
• Shorten front limiter strap.
• Install single skags (see your dealer).
• Make sure spindles and all steering components turn freely.
• Check ski alignment.
• Check skags and skis for damage.
• Decrease IFS preload.
TROUBLESHOOTING
129