Polaris 600 Fusion Owner's Manual page 94

Lubrication
Chaincase Oil
Oil Change
1. Position the vehicle on a level surface.
2. Remove the drain plug (4) and drain
the oil into a drain pan. Allow the oil
to drain completely.
3. Install a new sealing washer on the
drain plug.
NOTE: The sealing surfaces on the drain plug and the oil tank should
be clean and free of burrs, nicks or scratches.
4. Reinstall the drain plug. Torque to 6-10 ft. lbs. (8-13 Nm).
5. Remove the fill plug.
6. Add 11 oz. (325 ml) of the recommended oil. Do not overfill.
7. Reinstall the fill plug, making sure it is seated properly.
MAINTENANCE
4
91