Track Tension - Polaris 600 Fusion Owner's Manual

MAINTENANCE
Track Maintenance
WARNING
Moving parts can cut and crush body parts. When performing the checks
and adjustments recommended on the following pages, stay clear of all mov-
ing parts. Never perform track measurement or adjustments with the engine
running.

Track Tension

Track adjustment is critical for proper handling. Always maintain cor-
rect tension and alignment.
Suspension
IQ
M-10
NOTE: Tension adjustments should be made only after the track is
warmed up and limber.
1. Turn the engine off.
2. Lift the rear of the machine and safely support it off the ground.
3. Place the recommended weight or downward pressure on the track
at the specified distance (see chart) ahead of the center of the rear
idler wheel.
NOTE: Measure at the point where the weight is hanging.
114
TRACK TENSION DATA CHART
Weight
10 lbs. (4.54 kg)
10 lbs. (4.54 kg)
Measurement
Location
16 ahead of
I
rear idler shaft
16 ahead of
I
rear idler shaft
Slack
Measurement
3/8 -1/2
I I
(1-1.3 cm)
7/8 -1 1/8
I I
(2.2-2.9 cm)