Renault KOLEOS User Manual page 155

LANE DEPARTURE WARNING
6
5
Conditions for non-activation
of alerts
– Direction indicators activated for less
than around 2 seconds prior to de-
parting from the lane;
– very fast lane departure;
– driving continuously on a line;
– on bends, the function allows for
slightly cutting the bend;
– hazard warning lights activated;
– ...
(3/3)
Adjustment
Vehicles fitted with a navigation
2
system
From the multifunction screen 2, select
"Vehicle", "Driving assistance", "Lane
departure warning settings".
– Volume: adjust the alert volume to
one of five levels;
– sensitivity: adjust the sensitivity level
for line detection. To do this select:
– "Low" line detected upon cross-
ing;
– "Average" line detected on ap-
proach;
– "high" line detected nearby.
Vehicles not fitted with a navigation
system
– With the vehicle at a standstill, press
and hold the switch 5 OK to access
the settings menu;
– repeatedly press the control 6 up or
down until you reach the "Driving as-
sistance" menu. Press the switch 5
OK;
– repeatedly press control 6 up or
down until you reach the "Lane de-
parture warning settings" menu, then
press the switch 5 OK.
– Volume: adjust the alert volume to
one of three levels;
– sensitivity: adjust the sensitivity level
for line detection. To do this select:
– "Low" line detected upon cross-
ing;
– "Average" line detected on ap-
proach;
– "high" line detected nearby.
Operating faults
In the event of a malfunction, a mes-
sage "Lane departure warning check" is
displayed on the instrument panel, and
the visibility indicators for the left and
right lines disappear from the instru-
ment panel.
Consult an approved dealer.
2.51