Stop/Start System - If Equipped; Automatic Mode; Possible Reasons The Engine Does Not Autostop - Jeep COMPASS 2017 User Manual

NOTE:
• Rock mode is only available on the ve-
hicles equipped with the Off-Road pack-
age.
• Activate the Hill Descent Control for steep
downhill control. See "Electronic Brake
Control System" in this section for further
information.
STOP/START SYSTEM — IF
EQUIPPED
The Stop/Start function is developed to re-
duce fuel consumption. The system will stop
the engine automatically during a vehicle
stop if the required conditions are met. Re-
leasing the brake pedal or pressing the accel-
erator pedal will automatically re-start the
engine.

Automatic Mode

The Stop/Start feature is enabled after every
normal customer engine start. At that time,
the system will go into STOP/START READY
and if all other conditions are met, can go
into a STOP/START AUTOSTOP ACTIVE
"Autostop" mode.
156
To Activate The Autostop Mode, The Following
Must Occur:
• The system must be in STOP/START
READY state. A STOP/START READY mes-
sage will be displayed in the instrument
cluster display within the Stop/Start sec-
tion. Refer to "Instrument Cluster Dis-
play" in "Getting To Know Your Instrument
Panel" in your Owner's Manual at
www.jeep.com/en/owners/manuals for fur-
ther information.
• The vehicle must be completely stopped.
• The gear selector must be in a forward gear
and the brake pedal depressed.
The engine will shut down, the tachometer
will move to the zero position and the Stop/
Start telltale will illuminate indicating you
are in Autostop. Customer settings will be
maintained upon return to an engine running
condition.
Refer to the "Stop/Start System" in the
"Starting And Operating" section located in
your Owner's Manual at www.jeep.com/en/
owners/manuals for further information.
Possible Reasons The Engine Does Not
Autostop
Prior to engine shut down, the system will
check many safety and comfort conditions to
see if they are fulfilled. Detailed information
about the operation of the Stop/Start system
may be viewed in the instrument cluster
display Stop/Start Screen. In the following
situations the engine will not stop:
• Driver's seat belt is not buckled.
• Driver's door is not closed.
• Battery temperature is too warm or cold.
• Battery charge is low.
• The vehicle is on a steep grade.
• Cabin heating or cooling is in process and
an acceptable cabin temperature has not
been achieved.
• HVAC is set to full defrost mode at a high
blower speed.
• HVAC set to MAX A/C.
• Engine has not reached normal operating
temperature.
• The transmission is not in a forward gear.
• Hood is open.