Parkview Rear Back-Up Camera; Symbols And Messages On The Display; Refueling The Vehicle - Jeep COMPASS 2017 User Manual

PARKVIEW REAR BACK-UP
CAMERA

Symbols And Messages On The Display

You can see an on-screen image of the rear of
your vehicle whenever the transmission is
shifted into REVERSE. The ParkView Rear
Back-Up Camera image will be displayed on
the Uconnect Display, located on the center
stack of the instrument panel.
If the Uconnect Display appears foggy, clean
the camera lens located on the rear of the
vehicle above the rear license plate.
Refer to "ParkView Back-Up Camera — If
Equipped" in "Starting And Operating" in
your Owner's Manual at www.jeep.com/en/
owners/manuals/ for further details.
WARNING!
Drivers must be careful when backing up;
even when using the ParkView Rear
Back-Up Camera. Always check carefully
behind your vehicle, and be sure to check
for pedestrians, animals, other vehicles,
166
WARNING!
obstructions, or blind spots before backing
up. You must continue to pay attention
while backing up. Failure to do so can
result in serious injury or death.
CAUTION!
• To avoid vehicle damage, ParkView
should only be used as a parking aid.
The ParkView camera is unable to view
every obstacle or object in your drive
path.
• To avoid vehicle damage, the vehicle
must be driven slowly when using
ParkView to be able to stop in time when
an obstacle is seen. It is recommended
that the driver look frequently over his/
her shoulder when using ParkView.

REFUELING THE VEHICLE

The Capless Fuel System uses a flapper
placed at the filler pipe of the fuel tank; it
opens and closes automatically
insertion/extraction of the fuel nozzle. The
Capless Fuel System is designed so that it
prevents the filling of an incorrect type of
fuel.
1. Open the fuel filler door by pushing on the
outer edge of the Fuel Door.
Fuel Filler Door
upon