Fluids And Lubricants; Engine; Chassis - Jeep COMPASS 2017 User Manual

FLUIDS AND LUBRICANTS

Engine

Component
Engine Coolant
Engine Oil – 2.4 Liter Engine
Engine Oil Filter
Spark Plugs
Fuel Selection – 2.4 Liter Engine 87 Octane, 0-15% Ethanol

Chassis

Component
Manual Transmission – If Equipped
Six-Speed Automatic Transmission
(FWD Models) – If Equipped
Nine-Speed Automatic Transmission
(4WD Models) – If Equipped
Power Transfer Unit (PTU) – If Equipped
Rear Differential (RDM) – If Equipped
Brake Master Cylinder
Refrigerant
240
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 Kilometers) Formula OAT
(Organic Additive Technology) meeting the requirements of FCA Material Standard MS.90032.
We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of FCA Material Standard
MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade.
We recommend you use a Mopar Engine Oil Filter.
We recommend you use Mopar Spark Plugs.
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar C Series Manual & Dual Dry Clutch Transmission Fluid.
Use only Mopar AW-1 Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may
affect the function or performance of your transmission.
Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the
correct fluid may affect the function or performance of your transmission.
We recommended you use Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5).
We recommended you use Mopar Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 (API GL-5).
We recommend you use Mopar DOT 3. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
Use Only Refrigerant R134a
Charge Amounts:
2.4L Engines — 567g (1.25lb)