Universal Commands; Common-Practice Commands; Supported Commands; Burst Mode - Honeywell FS24X User Manual

Honeywell Analytics
6349-001

8. UNIVERSAL COMMANDS

Command #3 returns PV, units, and Loop Current. The first (PV) and the last (Loop Current)
variables are same.
Command #14 contains serial number of the device (3 bytes), followed by measurement units
(1 byte) and 3 floating point variables for max, min, and span loop current in mA.

9. COMMON-PRACTICE COMMANDS

9.1 Supported Commands

The following common-practice commands are implemented:
38 Reset "Configuration Changed" Flag
48 Read Additional Device Status
Command #48 returns 2 bytes of data.

9.2 Burst Mode

This Field Device does not support Burst Mode.

9.3 Catch Device Variable

This Field Device does not support Catch Device Variable.

10. DEVICE-SPECIFIC COMMANDS

The Field Device does not support any device-specific commands.
Revision 1.2, Release Date: 15 February 2013
Fire Sentry Corporation
Page 11 of 16