Table of Contents
Advertisement
24
300WN5
Go to cover page
1. Lay LCD-TV on a flat, soft and clean surface as Fig 1.
2. Remove speakers and bases as Fig 2.
3. Remove front bezel as Fig 3~7.
Mechanical Instructions
Fig 1
Fig 2 :
Remove 8
screws.
Fig 3 : Remove 3 screws
on the bottom.
Fig 4 : Remove 3 screws
on the left.
Fig 5 : Remove 3 screws
on the top.
Fig 6 : Remove 3 screws
on the right.
4. Remove back cover as Fig 8~11.
5. You can repair each board like this position as Fig 12.
Fig 7 : Remove 1 screw
on IR PCB.
Fig 8 : Remove
4 screws
on panel.
Fig 9 : Remove 6 hex
screws.
Fig 10: Remove control
PCB.
Fig 11 : Remove 3 screws
on audio jack
PCB.
Fig 12
Advertisement
Table of Contents
