Read and follow these instructions when connecting and using your computer monitor: Unplug the monitor if you are not going to use it for an extensive period of time.
Do not store or use the product in locations where there is a high level of humidity or in dusty environments. Do not allow water or other liquids to spill on or into the product. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/SAFETY.HTM (2 of 2)2005-02-16 10:33:02 AM RETURN TO TOP OF THE PAGE...
• Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: Safety and Troubleshooting Information well as other related information you may need.
Euroconnector (SCART) (available in Western Europe) MultiSystem TV tuner-PAL/NTSC/SECAM (available in TV model only) Technical Specifications* LCD PANEL • Type • Screen size file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (1 of 9)2005-02-16 10:33:08 AM • Resolution & Preset Modes • Physical Specification RETURN TO TOP OF THE PAGE TFT LCD 29.53 inch...
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
Page 9
'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Mode Video Active file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (4 of 9)2005-02-16 10:33:08 AM Mode H. freq (kHz) VGA VESA 60 31.469 37.879...
Page 10
• Power consumption • Temperature (operating) • Relative humidity • System MTBF * This data is subject to change without notice. Pin Assignment file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (5 of 9)2005-02-16 10:33:08 AM ® compliant. s an NERGY NERGY RETURN TO TOP OF THE PAGE 867.7mm x 505mm x 183mm (incl.
Page 11
No connect DDC Clock DDC Data No connect 2. The 15-pin D-sub connector (male) of the signal cable: Assignment Red video input file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (6 of 9)2005-02-16 10:33:08 AM Signal Assignment T.M.D.S. Data1- 10 T.M.D.S. Data1+ T.M.D.S. Data1/3 Shield 12 No connect...
Page 12
Signal Ground (SG) Received Line Signal Detector (DCD) DTE Ready (DTR) Ring Indicator 4. SCART Connector file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (7 of 9)2005-02-16 10:33:08 AM 10 Cable detect Identical output, connected to pin 10 12 Serial data line (SDA) 13 H. Sync / H+V 14 V.
Page 13
Intercommunication data line No. 2 Red signal ground Blanking signal ground Red signal I/O (0.7 Vp-p, 75 ohms) Blanking signal I/O (L: < 0.4V, H: >1.0V, 75 ohms) Composite video signal ground Blanking signal ground file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (8 of 9)2005-02-16 10:33:08 AM Signal...
Plug shield (common ground) Product Views Follow the links to see various views of the monitor and its components. Product Description file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PRODUCT.HTM (9 of 9)2005-02-16 10:33:08 AM RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
Page 15
OSD MENU Open the OSD or confirm the selected function DC power switch On/Off file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (1 of 8)2005-02-16 10:33:11 AM • Getting Started RETURN TO TOP OF THE PAGE •...
Page 16
D-Sub PC - Audio DVI-D RS232 External/ EURO-AV Composite Video Output Composite video CVBS ouput file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (2 of 8)2005-02-16 10:33:11 AM AC power in AC power switch PC analog D-Sub input PC Stereo input PC digital input RS232 network connection...
Page 17
Line out Audio/Video version AC IN AC Power D-Sub file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (3 of 8)2005-02-16 10:33:11 AM Audio (L) output Audio (R) output Audio (L) output for the detachable speaker (L) Audio (R) output for the detachable speaker (R) Audio output for external speakers...
Page 18
Audio (L) Output Audio (R) Output Line out Monitor version AC IN file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (4 of 8)2005-02-16 10:33:11 AM PC Stereo input PC digital input RS232 network connection SCART connection (for Europe only) Audio (L) output for the detachable speaker (L)
Page 19
RS232 Audio (L) Output Audio (R) Output Line out Side View (Right) TV version file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (5 of 8)2005-02-16 10:33:11 AM AC power switch PC analog D-Sub input PC Stereo input PC digital input RS232 network connection Audio (L) output for the detachable speaker (L)
Page 20
Composite Video Audio (L) Audio (R) S-Video RF 75 Audio/Video version file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (6 of 8)2005-02-16 10:33:11 AM Audio (L) for component video Audio (R) for component video Component video Y/Pb/Pr input Composite video CVBS input Audio (L) for CVBS and S-Video...
Page 21
Audio (R) S-Video Optimising Performance For best performance, ensure that your display settings are set at 1280x768, 60Hz. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (7 of 8)2005-02-16 10:33:11 AM Audio (L) for component video Audio (R) for component video Component video Y/Pb/Pr input Composite video CVBS input...
Page 22
This is included on this CD. Step-by-step instructions are provided to guide you through the installation process. Click on the link to find out more about this program. More about FP_setup04.exe file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM (8 of 8)2005-02-16 10:33:11 AM RETURN TO TOP OF THE PAGE...
PC Mode Audio/Video Mode TV Mode PC Mode A Main Menu B Sub-Menu name C Menu icon 1. With the menu off, push the MENU button to enter OSD system and display the main menu. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (1 of 23)2005-02-16 10:33:16 AM...
Page 24
This is used to exit out of the Main menu. Select video source for main display: INPUT SELECT file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (2 of 23)2005-02-16 10:33:16 AM button to enter the selected one, then use the Description PC ANALOG: PC VGA input PC DIGITAL: PC DIGITAL input...
BASS: Adjustable from 0 to 100 BALANCE: Adjustable from 0 to 100 VOLUME: Adjustable from 0 to 100 file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (3 of 23)2005-02-16 10:33:16 AM button to increase luminance; button to decrease luminance (min 0 ~ max. 100). button to increase the contrast;...
'Vertical' settings, the image will simply be shifted in response to your selection/change. Minimum is '0' ( 4:3 ASPECT RATIO: Select 4:3 image display FULL SCREEN: Select full screen (16:9) image display SIZE & POSITION file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (4 of 23)2005-02-16 10:33:16 AM ). Maximum is '100' (...
Page 27
AUTO ADJUST:Press to select automatic adjustment . PHASE :Use the PIXEL CLOCK:Use the IMAGING SETTINGS file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (5 of 23)2005-02-16 10:33:16 AM NOTE: 1. When operating in DVI mode, the positioning adjustments are not available. 2. The 4:3 Aspect Ratio and Full Screen items are not available in WXGA 1280x768 modes.
Page 28
BLUE PRESET: Equivalent to 9300K RED PRESET: Equivalent to 5700K USER PRESET: Adjust red, green, blue three colors from 0 to 100. COLOR SETTINGS file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (6 of 23)2005-02-16 10:33:16 AM Note: Operating in DVI mode, the Pixel Clock and Phase adjustments are not available.
Page 29
OSD HOLD TIME: The OSD stays active for as long as it is in use. The range of time setting is from 5 to 60 seconds. OSD LOCK: Controls user access to adjustments. Show key icon after selecting lock. SETTINGS file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (7 of 23)2005-02-16 10:33:16 AM...
Page 30
That is, English, Spanish, French, German, Italian (not available in NAFTA model) and Simplified Chinese (China models only). LANGUAGE file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (8 of 23)2005-02-16 10:33:16 AM Note: When the OSD is locked, press menu button on the monitor, and the OSD LOCK menu will appear. Press (+) to...
Page 31
SIZE: Turn off and set the size of PIP. Users can chose your preferred size. H POSITION: Adjust the Horizontal position of PIP. V POSITION: Adjust the Vertical position of PIP. VIDEO SOURCE: Select video source of PIP: PICTURE IN PICTURE file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (9 of 23)2005-02-16 10:33:16 AM SMALL MEDIUM LARGE EXIT TV TUNER...
Page 32
On Screen Display RETURN TO TOP OF THE PAGE Audio/Video Mode Exit from this menu. EXIT file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (10 of 23)2005-02-16 10:33:16 AM...
Page 33
CONTRAST: Adjustable from 0 to 100 COLOR: Adjustable from 0 to 100 SHARPNESS: Adjustable from 0 to 100 TINT: Not available in component input in all models. Adjustable from 0 to 100 HORIZONTAL SHIFT: Adjustable from 0 to 100 file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (11 of 23)2005-02-16 10:33:16 AM...
Page 34
TREBLE: Adjustable from 0 to 100 BASS: Adjustable from 0 to 100 BALANCE: Adjustable from 0 to 100 VOLUME: Adjustable from 0 to 100 SURROUND: Switch Surround Sound On/ Off MUTE: Switch Mute On/ Off AUDIO file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (12 of 23)2005-02-16 10:33:16 AM...
Page 35
On Screen Display Set language for OSD. There are 6 languages of OSD display. ENGLISH DEUTSCH ITALIANO LANGUAGE NOTE: In AP/China models, Simplified Chinese is supported. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (13 of 23)2005-02-16 10:33:16 AM...
STANDARD MODE SPECIAL FEATURES FULL SCREEN NONLINEAR SCALING 1) When users first enter the PARENTAL CONTROLS, the screen will show the window asking user key in the code. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (14 of 23)2005-02-16 10:33:16 AM buttons to toggle Light Sensor function.
CLEAR ALL PARENTAL CONTROLS 3) Enter Master code "0711" twice or the code entered in step 1. Reset the setting to default values. NO: Keep the setting as current. YES: Load factory setting FACTORY RESET file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (15 of 23)2005-02-16 10:33:16 AM...
Page 38
PC DIGITAL: PC DIGITAL input TV TUNER: Antenna or cable TV input EXT: Scart input COMPOSITE: Composite video input S-VIDEO: S-video input COMPONENT: Component video input INPUT SELECT file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (16 of 23)2005-02-16 10:33:16 AM RETURN TO TOP OF THE PAGE...
Page 39
COLOR TEMP: Select from Normal, Cool or Warm by "-" and "+" buttons. PICTURE NOTE: 1. "TINT" is not available in component input in all models. 2. "TINT" is available in NAFTA model only. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (17 of 23)2005-02-16 10:33:16 AM...
Page 40
BALANCE: Adjustable from 0 to 100 VOLUME: Adjustable from 0 to 100 SURROUND: Switch Surround Sound On/ Off AUDIO MUTE: Switch Mute On/ Off Set language for OSD. There are 6 languages of OSD display. ENGLISH DEUTSCH ITALIANO LANGUAGE file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (18 of 23)2005-02-16 10:33:16 AM...
Page 41
OSD LOCK: Show key icon after selecting lock. LIGHT SENSOR: Push the function. VIDEO MODE: Set the screen scaling mode to suit personal preference: STANDARD MODE SPECIAL FEATURES FULL SCREEN NONLINEAR SCALING file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (19 of 23)2005-02-16 10:33:16 AM buttons to toggle Light Sensor...
Page 42
1) When users first enter the PARENTAL CONTROL, the screen will show the window asking user key in the code. 2) Users will see the window" Access code" when they enter this foundation. EXIT LOCK CHANGE CODE PARENTAL CLEAR ALL CONTROLS file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (20 of 23)2005-02-16 10:33:16 AM...
On Screen Display 3) Enter Master code "0711" twice or the code entered in step 1. SYSTEM: NOTE: The SYSTEM item is only available in Western Europe model. CHANNEL SEARCH: SETUP file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (21 of 23)2005-02-16 10:33:16 AM...
On Screen Display MANUAL STORE: CHANNEL SKIP: CHANNEL SWAP: Reset the setting to default values. NO: Keep the setting as current. YES: Load factory setting FACTORY RESET file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (22 of 23)2005-02-16 10:33:16 AM RETURN TO TOP OF THE PAGE...
Page 45
On Screen Display file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (23 of 23)2005-02-16 10:33:16 AM...
Remote Control Remote Control On Screen Display • Using Your Remote Control Using Your Remote Control For Europe and most of Asia Pacific countries For Europe and most of Asia Pacific countries Remote Control Diagram file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (1 of 4)2005-02-16 10:33:20 AM...
Page 47
PIP On/Off, Size PC mode and to enlarge or reduce the PIP window size using the same button. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (2 of 4)2005-02-16 10:33:20 AM To select TV/Video sources in PIP mode and TV mode If using TV 'STANDBY', press this button to...
Page 48
To show OSD status. Mode Screen format 4:3, 16:9, non-linear, or automatic. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (3 of 4)2005-02-16 10:33:20 AM For direct access to programmes For a 2-digit programme number, the 2nd digit must be entered before the dash disappears. If using TV 'STANDBY', press any of number...
Page 49
The Teletext related color buttons (#11) and the above six buttons (#20 ~ 25) are functionless in monitor, video models, and non PAL system TV. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (4 of 4)2005-02-16 10:33:20 AM To switch from STEREO to MONO or to choose between Dual I and Dual II for bilingual transmissions.
Adobe® Acrobat Reader for PC Download instructions: To download the file: 1. Click-and-hold your mouse over the icon below. (Win95/98/2000/Me/XP users right-click) 300WN5.pdf Download file:///D|/My%20Documents/dfu/300WN5/english/download/download.htm (1 of 3)2005-02-16 10:33:25 AM • Download and Printing Instructions Adobe® Acrobat Reader for • Installing FPadjust...
Page 52
PC running Windows® 95, Windows® 98, Windows® 2000, Windows® Me, Windows® XP or later To install FPadjust Program: Click on the link or icon to install FPadjustment Program. Click-and-hold your mouse over the icon. (Win95/98/2000/Me/XP users right-click) file:///D|/My%20Documents/dfu/300WN5/english/download/download.htm (2 of 3)2005-02-16 10:33:25 AM RETURN TO TOP OF THE PAGE...
Page 53
Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Exit your browser and install the FPadjust Program. Read the "FP_Readme04.txt" file before installing. file:///D|/My%20Documents/dfu/300WN5/english/download/download.htm (3 of 3)2005-02-16 10:33:25 AM RETURN TO TOP OF THE PAGE...
Restart your computer and repeat steps 2 and 3 to verify that your PC is set at 1280x768@60Hz. Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC.
Page 55
(TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology. Will the LCD screen be resistant to scratches? file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/SAF_FAQ.HTM (2 of 9)2005-02-16 10:33:31 AM...
A protective coating is applied to the surface of the LCD, which is durable to a certain extent (up to 3H in this Philips 30" LCD monitor). In general, it is recommended that the panel surface is not subjected to any excessive shocks or scratches. An optional protective cover with greater scratch resistance is also available.
Page 57
Can I connect my LCD monitor to any PC, workstation or Mac? Yes, all Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system.
Page 58
This provides a better picture quality than is achieved with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal. LCD Panel Technology What is a Liquid Crystal Display? file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/SAF_FAQ.HTM (5 of 9)2005-02-16 10:33:31 AM RETURN TO TOP OF THE PAGE...
Page 59
The passive matrix LCD has a grid of conductors with pixels located at each intersection in the grid. How does a TFT LCD Panel work? file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/SAF_FAQ.HTM (6 of 9)2005-02-16 10:33:31 AM...
Page 60
The TFT LCD panel is an element that controls/displays the inlet of a backlight using the dual-refraction of a liquid crystal. Using the property that the projection of inlet light refracts toward the major axis of the liquid element, it controls the direction of inlet light and file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/SAF_FAQ.HTM (7 of 9)2005-02-16 10:33:31 AM...
Page 61
European Directive. A European Directive is a European 'Law' that relates to health, safety, environment and consumer protection, much the same as the U. S. National Electrical Code and UL Standards. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/SAF_FAQ.HTM (8 of 9)2005-02-16 10:33:31 AM RETURN TO TOP OF THE PAGE...
Page 62
FAQs (Frequently Asked Questions) Does the product conform to general safety standards? Yes. Philips LCD monitors conform to the guidelines of MPR-II standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability. The specification page provides detailed data on safety standards.
Remote Control Problems • Self-Test Feature Check (STFC) This page deals with problems that can be corrected by the user. If the problem still persists after you have tried these solutions, contact your nearest Philips dealer. Common Problems Having this Symptoms...
Page 64
Geometric Distortion Screen not centered correctly file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (2 of 8)2005-02-16 10:33:32 AM Auto adjust image through Menu -> Image Setting -> Auto Adjust Adjust Phase and Clock controls via OSD Perform the LCD Monitor TV factory reset (via Menu ->...
Page 65
Intermittent Problems The LCD Monitor TV malfunctions on & off file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (3 of 8)2005-02-16 10:33:32 AM Perform the LCD Monitor TV reset Auto adjust image through Menu -> Image Setting -> Auto Adjust Adjust Phase and Clock controls via OSD...
Page 66
No sound with sound was playing Video Problems file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (4 of 8)2005-02-16 10:33:32 AM The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your pictures: see 'fine tuning' or adjust the direction of the outside aerial.
Page 67
Image is centered small on screen, but does not fill entire viewing area file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (5 of 8)2005-02-16 10:33:32 AM Check Video Input Selection Composite: Yellow colored RCA jack S-Video: Typically a round 4 pin jack Component: Typically 3 RCA jacks of Green, Red and Blue.
OSD Warning Messages A warning message may appear on the screen indicating the LCD Monitor TV current status. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (6 of 8)2005-02-16 10:33:32 AM Turn the LCD Monitor TV off and unplug the power cord and then plug back and power on.
Digital(white connector) and the Analog(blue connector) cables from the back of computer. Turn on the LCD Monitor TV. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (7 of 8)2005-02-16 10:33:32 AM This message means that there is no video input signal. The LCD Monitor TV is in a power saving mode (in PC mode).
Page 70
Troubleshooting The floating 'Philips - self-test Feature Check' dialog box should appear on-screen (against a black background) if the LCD Monitor TV cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains green and the self-test pattern will scroll through the screen continually.
Safety and Troubleshooting Questions (FAQs) CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:2000 (Safety requirement of Information Technology Equipment) - EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)
Page 72
Switch OFF s an NERGY meets the We recommend you switch off the monitor when it is not in use for quite a long time. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (2 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE PHILIPS 300WN5 LED Indicator...
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. Commission Federale de la Communication (FCC Declaration) file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (3 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
Page 74
N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (4 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE...
Page 75
Interference. Install and use the equipment according to the instruction manual. Class B ITE MIC Notice (South Korea Only) Class B Device file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (5 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (6 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE...
Page 77
Regulatory Information North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (7 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE...
Page 78
Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. BSMI Notice (Taiwan Only) file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (8 of 11)2005-02-16 10:33:34 AM RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
Page 79
Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
Regulatory Information file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (10 of 11)2005-02-16 10:33:34 AM WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse.
Page 81
Regulatory Information file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (11 of 11)2005-02-16 10:33:34 AM connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW. 2. The BLUE wire must be connected to the terminal which is marked with the letter "N"...
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_other.htm2005-02-16 10:33:34 AM • FAQs •...
TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
Page 84
Black Dot Defects appear as pixels or sub pixels that are always dark or 'off'. These are the types of black dot defects: file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (2 of 4)2005-02-16 10:33:41 AM Two adjacent lit sub pixels: - Red + Blue = Purple...
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Page 86
Total bright or black dot defects of all types Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect All Philips monitors are ISO13406-2 Compliant file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (4 of 4)2005-02-16 10:33:41 AM ACCEPTABLE LEVEL 300WN5 5 or fewer 1 or fewer...
Page 87
Accessory Pack Getting Started • Optimizing Performance Accessory Pack Unpack all the parts. Power cable DVI-D cable file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (1 of 13)2005-02-16 10:33:47 AM • Connecting to Your PC, TV Antenna, DVD/VCR etc. Remote control & batteries VGA signal cable •...
Page 88
Connecting to Your PC, TV Antenna, DVD/VCR etc. E-DFU pack Accessories below are available for TV model only. S-video cable Base 2x 5W Detachable Speakers RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (2 of 13)2005-02-16 10:33:47 AM...
Page 89
Setting up and connecting your monitor/TV CAUTION: Ensure that the power to the monitor/TV is switched off before the installation. - Connecting the monitor/TV Connect the cables to the rear of your monitor/TV according to the numbers: TV model file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (3 of 13)2005-02-16 10:33:47 AM...
Page 90
Connecting to Your PC, TV Antenna, DVD/VCR etc. Audio/Video model file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (4 of 13)2005-02-16 10:33:47 AM...
Page 91
Connecting to Your PC, TV Antenna, DVD/VCR etc. Monitor model file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (5 of 13)2005-02-16 10:33:47 AM...
Page 92
For installation of the monitor driver for Microsoft Windows®, see the Monitor Driver Installation section (Getting - Connect to DVD/VCD/VCR Connect to DVD/VCR/VCD through S-VIDEO Connect to DVD/VCR/VCD through S-VIDEO file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (6 of 13)2005-02-16 10:33:47 AM RETURN TO TOP OF THE PAGE Troubleshooting Started). RETURN TO TOP OF THE PAGE section.
Page 93
Connecting to Your PC, TV Antenna, DVD/VCR etc. Connect to DVD/VCR /VCD through SCART (for Europe only) file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (7 of 13)2005-02-16 10:33:47 AM...
Page 94
Connecting to Your PC, TV Antenna, DVD/VCR etc. Connect to DVD/VCR /VCD through composite video (CVBS) file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (8 of 13)2005-02-16 10:33:47 AM...
Page 95
Connecting to Your PC, TV Antenna, DVD/VCR etc. Connect to DVD/VCR /VCD through component video (YPbPr) file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (9 of 13)2005-02-16 10:33:47 AM...
Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE Connecting to Cable TV file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (10 of 13)2005-02-16 10:33:47 AM...
Page 97
Connecting to Your PC, TV Antenna, DVD/VCR etc. Antenna Progressive video and HDTV connections for digital high-definition picture file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (11 of 13)2005-02-16 10:33:47 AM...
Page 98
Connecting to Your PC, TV Antenna, DVD/VCR etc. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (12 of 13)2005-02-16 10:33:48 AM...
Page 99
Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (13 of 13)2005-02-16 10:33:48 AM...
Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows®...
Page 101
Click on the 'Display' Icon. Select the 'Settings' tab then click on the 'Advanced' button. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/gt_start.htm (2 of 3)2005-02-16 10:33:48 AM...
Page 102
Click on the 'OK' button and then the 'OK' button again to close the Display_Properties dialog box. If your Windows® 95/98/2000/Me/XP version is different or you need more detailed installation information, please refer to Windows® 95/98/2000/Me/XP user's manual. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/gt_start.htm (3 of 3)2005-02-16 10:33:48 AM RETURN TO TOP OF THE PAGE...
Page 103
Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective. Philips aims at a swap within 48 hours of your call being received.
Page 104
Note that products that are not originally designed, manufactured, approved and/or authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.
Page 105
Your Philips F1rst Choice Warranty Information. Or you can reach us via: Website: http://www.philips.com/support file:///D|/My%20Documents/dfu/300WN5/english/warranty/war_1st.htm (3 of 3)2005-02-16 10:33:54 AM...
In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
Ship product via a traceable carrier. When it is necessary for you to ship the product to Philips for repair, you will pay the shipping cost for shipment to Philips. Philips will pay the shipping costs when returning the product to you.
Page 108
Italy Luxembourg The Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom file:///D|/My%20Documents/dfu/300WN5/english/warranty/warfirst.htm2005-04-08 10:44:39 AM Telephone number 01 546 575 603 070 253 010 800 92256 3525 8761 09 2290 1908 08 9165 0006 0180 5 007 532 00800 3122 1223...
Page 112
Vedia 3892 Capital Federal CP: 1430 Buenos Aires Phone/Fax: (011)-4544 2047 BRASIL Philips da Amazônia Ind. Elet. Ltda. Rua Verbo Divino, 1400-São Paulo-SP CEP-04719-002 Phones: 11 21210203 -São Paulo & 0800-701-0203-Other Regions without São Paulo City file:///D|/My%20Documents/dfu/300WN5/english/warranty/warcic.htm (4 of 11)2005-04-08 10:44:45 AM...