Invacare Storm4 Service Manual page 13

Adjusting seat tilt on a seat with a manual tilt module
(from Dec. 2010)
CAUTION!
Risk of crushing
Seat and frame are very heavy and can fall down
without warning if seat tilt adjustment assembly
is screwed apart too far. Risk of injury to hands
and feet.
– Only change adjustments when someone is
seated in chair.
– Only change tilt adjustment to where distance
between axles is a maximum of 300 mm.
• 19 mm wrench
• Measuring tape
1533060-M
1. Apply wrench to bolt (1) of tilt adjustment.
2. Turn tilt adjustment till desired angle is attained or
distance between bolts is a maximum of 300 mm.
Setup
13