HARDWARE FOR ANCHORING:
Wall Anchor (1)
Screw for Wall Anchor (1)
Screw for Mantel (1)
Safety Cable (1)
Wall Anchor Safety Cable:
The use of wall anchor safety cable is highly recommended in order to reduce the risk of the fireplace being
tipped over accidentally.
WARNING: THIS CABLE MAY REDUCE POSSIBLE RISK OF INJURY IF THE FIREPLACE IS IMPROPERLY
HANDLED, BUT IS NOT A SUBSTITUTE FOR PROPER ADULT SUPERVISION. CHILDREN SHOULD NOT
BE LEFT UNATTENDED NEAR ANY HEATER.
1. Drill a 5/16" (8mm) hole ion the wall. Insert the plastic wall anchor into the hole and gently tap until the
flange on the anchor is against the wall surface.
2. Position the back edge of the mantel close to the wall.
3. Attach the safety cable to the mantel using the screw for mantel.
4. Use the screw for the wall to attach the other end of safety cable to the wall.
5. Make sure all screws are tight.
~ 6 ~