Pre-Tare Setting - Fnc 09 - KERN CXB 3K0.2 Operating Manual

13.5 Pre-Tare setting - FnC 09

Under this menu item, Pre-Tare setting can be carried out. Two settings are possible:
00
Pre-Tare not possible when a load is on the weighing plate
01
Pre-Tare possible when a load is on the weighing plate
Procedure with setting „00":

Ensure that there is no load on the weighing plate

Press , „Pre-Tare" will be displayed flashing

Use the numeric keyboard to enter the Pre-Tare value, e.g. 1000 g

Confirm by

Delete Pre-Tare value by
48
, the Pre-Tare value will be displayed as a negative value.
CXB-BA-e-1622