Ka Narrow Mode; Vg-2 Mode - Whistler GT-268Xi User Manual

OPERATION

Ka Narrow Mode

Many countries do not share the same Ka radar guns as the
USA. Having a radar detector that scans the complete Ka
band may not be necessary if your Country is only using
one or more of the following (34.0 or 34.3 GHz). See
Option Select Mode to engage Ka Narrow mode.
Display showing Ka Narrow Mode

VG-2 Mode

See Option Select Mode to turn this feature on/off. When a
VG-2 signal is detected, the VG-2 alert is sounded and the
display flashes "VG-2". After 3 seconds the audio is
canceled and the display no longer flashes. This cycle is
repeated if the VG-2 signal is detected again.
During the period a VG-2 signal is detected, a radar
signal cannot be detected.
However, because the VG-2 alert has confirmed that a
patrol car is nearby, you are already aware of the potential
for speed monitoring and can adjust your speed
accordingly. Laser detection is not affected while a VG-2
signal is detected. (See page 27 for more information)
Display showing VG-2 Alert
16