Radar/Laser Alerts; Laser Audio/Visual Alerts; Pulse Protection - Whistler GT-268Xi User Manual

Table of Contents

Advertisement

Laser/Radar Alerts
Speed Radar Audio/Visual Alerts when X, K or Ka is
detected, the band ID and signal strength are displayed.
The audio alert is continuous and has a Geiger counter-like
pattern. The faster the beep, the closer or stronger the
radar source.

Laser Audio/Visual Alerts

When a laser signal is detected the audio alert is continuous
for a minimum of 3 seconds.
• The unit's "L" icon will illuminate along with a corresponding
segment to indicate the general PPS rate of the source.
• When a TraffiPatrol XR laser gun is detected the unit's "L" icon
will illuminate along with an "t" on the display.
Pulse Protection®
Pulse (or instant-on) radar is more of a threat than
conventional radar because it remains "off" until activated
to measure the speed of a targeted vehicle. When a pulse
type transmission is detected, your Whistler detector
sounds an urgent 3-second audio warning and the display
shows a "P".
After the 3-second pulse alert, the standard alert pattern
continues for as long as the signal is present. It is
important to respond promptly to a pulse alert, since
warning time may be minimal.

RADAR/LASER ALERTS

21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents