Whistler GT-268Xi User Manual page 11

Auto Quiet Mode
Auto Quiet mode provides an alternate alert pattern
approximately 5 seconds after a radar or safety warning
system signal is detected followed by clicking. The clicking
will continue for as long as the detected signal is present
and for any new signal within 20 seconds. Auto Quiet mode
does not affect laser alerts.
• Press Quiet (before a signal is detected) to engage Auto Quiet
mode.
• Once the Auto Quiet mode is engaged, you may cancel the
audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel Auto
Quiet mode.
Quiet Mode
Quiet mode cancels audio during an alert and any new alert
within 20 seconds. After 20 seconds of no radar signal
detected, the audio alerts are restored.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to restore the
standard audio alert pattern.
OPERATION
11