Table of Contents
Advertisement
69ruman.qxp
1/26/2012
1:43 PM
OPERATION
Dim/Dark Modes
Dim/Dark Mode reduces the illumination of the display.
• Briefly press and release the Dark button to reduce
illumination to a Dim setting.
• Briefly press and release the Dark button a second time
engages Dark Mode. In Dark Mode, the display goes dark
for as long as a signal is being detected and for 20
seconds after, then the display returns to the dim setting.
Dim Modes can be engaged during an alert.
• Briefly press and release the Dark button a forth time to
restore full illumination to the display.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off the detector
after 6 hours if the unit has constant power.
The timer is reset:
1. Each time the detector is turned off
2. The power cord is disconnected or power is removed
to the unit.
3. Any button is pressed before the timer has expired.
The detector will alert you with an audible and visual
warning before it shuts off.
During this warning you can reset the timer by pressing any
button. If the unit has automatically turned itself off, press
the Power button to turn the unit back on.
Page 17
14
OPERATION
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and release.
• Press Power to cancel.
X/K Filter Modes
Recently, many new products operate on X or K band causing
nuisance alerts to radar detectors. Some of these are radar
based Traffic Monitoring Systems mounted to poles alongside
the highway and others are K Band Lane Change Assistants
and Blind Spot Detectors found on some automobiles. The
X/K Filter Mode offers multiple levels of rejection to reduce
false alerts caused by these systems.
Ka Filter Modes
There are times when a radar detector in another vehicle, can
emit a frequency which can cause your detector to falsely
alert. The Ka Filter Modes allow you to select the level
needed for your area to minimize the occurrences of these
false alerts.
Filter 1 Mode is the factory default setting and should provide
adequate filtering for most conditions. If you experience
excessive alerts due to radar detectors in other vehicles,
increase the Filter level. See Option Selection Mode to
change the filter settings.
Display showing XK Filter 1 Mode
15
Display showing Ka Filter 1 Mode
Advertisement
Table of Contents
