Vehicle Battery Saver Mode; Filter Mode; Ka Max Mode; Radar Signature Id (Rsid) - Whistler PRO-3600 Owner's Manual

Laser/radar detector
Hide thumbs Also See for PRO-3600:
Table of Contents

Advertisement

OPERATION
Vehicle Battery Saver Mode - Security Mode
Vehicle Battery Saver Mode automatically shuts off the
detector if the unit has constant power.
The timer is reset:
1. Each time the detector is turned off
2. The power cord is disconnected or power is removed
to the unit.
3. Any button is pressed before the timer has expired.
The detector will alert you with an audible and visual
warning before it shuts off. This auto off function can
be programmed for the following: Off, 1, 3, or 6 hours.
During this warning you can reset the timer by
pressing any button. If the unit has automatically
turned itself off, press the Power button to turn the
unit back on.
Security Mode
When the unit is powered off by the Vehicle Battery Saver
Mode or by pressing the power button, the Security LED will
begin to flash if the security LED option is turned on. This
simulates a vehicle alarm system.
Refer to "Option Select Mode" for instructions for changing
the Vehicle Battery Saver/Security Mode settings.
14
OPERATION
Four Filter Modes
There are times when a radar detector in another vehicle, can
emit a frequency which can cause your detector to falsely
alarm. The Whistler Filter Mode options provide additional
signal processing to minimize the occurrences of these false
alarms. Filter mode provides normal processing. Filter 1,
Filter 2, and Filter 3 modes provide additional signal analysis
before alarming.
Filter Mode is the factory default setting and should provide
adequate filtering for most conditions. If you experience
excessive alerts due to radar detectors in other vehicles, try
Filter 1, Filter 2, and then Filter 3 modes. Filter Mode analysis
occurs in Highway Mode and all City Modes. See Option
Selection Mode to change the filter settings.
Note: Speed selectable Filter is available with the optional
GPS module.

Ka Max Mode

Ka Max Mode provides enhanced Ka sensitivity - increased
detection. This mode can be selected with or without RSID.
See Option Select Mode for changing Ka options.
Whistler has two new exciting features that will assist the
driving enthusiast to further identify threats from Laser and Ka
band radar guns.
Radar Signature ID (RSID) with Voice Prompts
Identify the difference between the likelihood of a Ka threat vs.
the likelihood of a Ka false from another source (possible radar
detector).
15

Advertisement

Table of Contents
loading

Table of Contents