VeriFone VX 685 Installation Manual page 32

S
ETUP
VX 690 Wi-Fi/BT Support
NOTE
WARNING
Pairing the Terminal
with a Bluetooth AP
Base Station
32
VX 685/VX 690 I
NSTALLATION
6
Once the terminal discovers the Bluetooth AP Charging Base Station, the
base station's friendly name is then displayed.
If the devices are unable to find each other after two minutes, press the Bluetooth
switch found in front of the Bluetooth AP Base. After pressing the switch, the three
LEDs will blink indicating that the Bluetooth AP Base is discoverable.
Pressing the Bluetooth switch while there is an existing Bluetooth connection
may result in loss of connection, loss of modem profile, and loss of all modem
settings/configuration.
Even after you have successfully searched for a Bluetooth AP Base Station using
the terminal, you will not be able to conduct Bluetooth transactions until you have
paired the terminal and the base station.
To pair the terminal with the base station:
1
Navigate to the BT Devices menu, select the base station's friendly name,
then press the Enter key.
2
Select the base station's name, then press the Enter key.
G
UIDE