Yamaha LST1200X1999 Service Manual page 226

Step Procedure / Part Name
STEREO HARNESS #5
REPLACEMENT
Battery leads
1 Speaker
Remote control assembly
2 Stereo remote keypad connectors
3 Stereo harness #5 to harness
lead #3 connector
4 Stereo harness #5 to meter panel
leads
5 Stereo harness #5 to accessory
outlet leads
6 Stereo harness #5 to stereo
harness #6 connectors
7 Stereo harness #5 to stereo
keypad connector
8 Stereo harness #5
SERVICE POINTS
NOTE:
Removal of all old harness(s) may not be possi-
ble.
ELECTRICAL SYSTEM
Qty Service Points
Follow the "Step" order for removal.
2
2
1 Refer to "REMOTE CONTROL SYSTEM"
in Chapter 8
2
1
2 For accessory outlet (Pu/R and B)
2 Access: Passenger pod
2
1
1
Reverse the removal steps for installation.
Secure the harness where possible in the same
method as the old harness.
Where this is not possible, secure to the old har-
ness. Cut and remove any old harness(s) that is
accessible to avoid confusion during future ser-
vicing.
17
ELEC
x
7