Yamaha LST1200X1999 Service Manual page 190

Step Procedure / Part Name
DECK HARNESS REPLACEMENT
Battery leads
1 Oil sending unit lead
2 Stern light socket
Seat base board
3 Fuel sending unit lead
4 Horn leads
5 Deck harness to harness lead #1
connector
6 Deck harness to harness lead #2
connector
7 Bow light socket
8 Deck harness
SERVICE POINTS
NOTE:
Removal of all old harness(s) may not be pos-
sible.
ELECTRICAL SYSTEM
Qty Service Points
Follow the "Step" order for removal.
2
1
2 Disconnect leads
Refer to "SEAT FITTINGS" in Chapter 8
1
2 Access: Helm pod
1
1
2 Disconnect leads
1
Reverse the removal steps for installation.
Secure the harness where possible in the same
method as the old harness.
Where this is not possible, secure to the old har-
ness. Cut and remove any old harness(s) that is
accessible to avoid confusion during future ser-
vicing.
25
ELEC
x
7