Overview; Mtl Gecma Rt Com Module; Technical Data - Eaton Crouse-hinds series Instruction Manual

3
4
INM MTL GECMA RT COM rev 2
DRAFT - 04 March 2016

OVERVIEW

The MTL GECMA RT COM module is an Ex certified communications interface
unit for use in Zone 1 and Zone 2 hazardous areas.
It is intended for use with MTL GECMA approved products and is specifically
designed to be used with Ex certified MTL GECMA graphic display modules
and will also normally be accompanied by an MTL GECMA power supply (PSU)
module to enable the displays to be used in a hazardous area.
Its primary purpose is to receive data from a PC in the safe area, via an Ex certified
data link in the form of a fibre-optic cable connected to a MTL GECMA safe area
unit. It also provides the appropriate interfaces for local peripheral control modules
such as keyboards, pointing devices, etc. It is powered from the same power
supply module as the display.

MTL GECMA RT COM MODULE

4 .1

Technical data

Voltage input
Current input
Fibre optic
USB
PS/2
RS232
Resolution supported
Weight
Certified ambient temperature -30°C to +60°C
Operating temperature range
22V (nominal)
1.5A (nominal)
LC duplex connector, 500m (MM), 10km (SM)
4 x Ex ib ports, low power, USB 2.0 transparent
1 x Ex ib keyboard, 1 x Ex ib pointing device
1 x Ex ib
Up to 1920x1200 @ 60Hz
5.3 kg (nominal)
-10°C to +50°C
9