LNL-3300-M5 Intelligent System Controller
8
Dual NIC Operation
Unless otherwise stated, use the following information to configure the LNL-3300-M5 for dual network
card interface (NIC) operation.
8.1
LNL-ETHLAN-MICR (Micro Serial Server)
The ETHLAN-LITE/ETHLAN-MICR device plugs directly onto the LNL-3300-M5 panel and provides the
ability to configure the controller for dual NIC operation.
8.2
ETHLAN-MCR Standoffs
The standoffs for the ETHLAN-LITE/ETHLAN-MICR come in a separate package. The following diagram
illustrates the positioning.
8.3
ETHLAN-MICR Addressing
The ETHLAN-LITE/ETHLAN-MICR device should be labeled with its Ethernet/hardware address
(example: 00-80-a3-2b-02-3b).
Assign this address to a TCP/IP address over the network by using the ARP utility. In order to do this, the
ARP table on the Windows PC must have at least one IP address other than its own defined. If the ARP table
is empty, the command will return an error message saying that the ARP table addition failed.
42 —
revision 7
Richco plastic P/N LMSP-7-01
Standoffs for ETHLAN
LITE to ISC
INSERT
STANDOFFS
HERE
DO NOT DISPOSE
[Qty 3]