Yamaha AW2816 Service Manual page 28

AW2816
5-6 Remove the four (4) screws marked [700J]. The CD-
RW holder can then be removed. (Fig.3)
5-7 Remove the thirteen (13) screws marked [700K]. The
sub chassis can then be removed. (Fig.7)
5-8 Remove the four (4) screws marked [700L]. The LCD
support can then be removed. (Fig.8)
5-9 PN Circuit Board:
Remove the twelve (12) screws marked [700M]. The
PN circuit board can then be removed. (Fig.8)
5-10 LCD:
Remove the two (2) screws marked [730]. The LCD
can then be removed from the LCD support. (Fig.9)
5-11 SUB-INV Circuit Board:
Remove the four (4) screws marked [740]. The SUB-
INV circuit board can then be removed from the LCD
support. (Fig.9)
[700K]
[700K]: Bind Head Tapping Screw-B
3.0X8 MFZN2BL (EP600190)
Fig.7
LCD
28
[700K]
[700K]
[730]
LCD support
SUB-INV
[740]X4
[700M]
Sub chassis
[700K]
[700M]
[700]: Bind Head Tapping Screw-B
3.0X8 MFZN2BL (EP600190)
[730]: Bind Head Tapping Screw-S
2.6X8 MFZN2Y (V5679500)
[740]: Bind Head Tapping Screw-S
2.6X4 MFZN2Y (VU757900)
Fig.9
[700L] LCD support [700M]
[700M]
Fig.8
PN