AnyCubic i3 MEGA Quick Start Manual page 30

(4.1) Lay flat: it is very impartant to ensure the flat portion of the model is well
attached to the platform. So, please use Lay Flat option everytime after rotating the
model, as it will minimize the adhesion issues during printing. (Fig. 24)
(4.2) Reset: click it to return the model to the original orientation.
(5) Scale: to uniformly scale the model along X/Y/Z dimensions. To disable uniform
scaling, click the lock in the lower section of the scaling window. (Fig. 25)
(6) View mode (Fig. 26): to view the model in different ways and helps to spotting issues
Lay flat
Reset
(Figure 24)
(Figure 25)
24