Add-On Sensors (Sold Separately) - La Crosse Technology C84428 Instruction Manual

Add-on Sensors (sold separately)

One benefit of your La Crosse View App is the ability to remote monitor multiple locations in your home by adding com-
patible sensors. These add-on sensors will read directly to the app. You can conveniently name each sensor and have it
read to the smart box on your station.
To add a sensor that reads directly to La Crosse View:
1. Bring your add-on sensor close to station.
2. Insert batteries into sensor.
3. Open your La Crosse View app and select ADD DEVICES. Press the + button to add the sensor (device)
4. Scan the bar code on the sensor and follow instructions in La Crosse View.
5. Place sensor in appropriate location (see mounting instructions on page 6)
Stream the add-on sensor (Device Data Feed) on your station:
1. Open the La Crosse View app and select your station.
2. Scroll down to the Smartbox section and press the blue icon.
3. Follow instruction on app to add" Device Data Feed" and select your sensor.
Professional Remote Monitoring Station Page | 12