Temperature Trend Icons; Channels-Auto Scroll; Add Sensors - La Crosse Technology 308-1451v2 Instruction Manual

Wireless forecast station
Hide thumbs Also See for 308-1451v2:
Table of Contents

Advertisement

The temperature (2°F/1°C) and humidity (3% RH) trend indicators update
every 30 minutes or less.
• Temperature has risen in the past 3 hours.
• Humidity has risen in the past 3 hours.
• Temperature has not changed in the past 3 hours.
• Humidity has not changed in the past 3 hours.
• Temperature has fallen in the past 3 hours.
• Humidity has fallen in the past 3 hours.
Channel Search: The Forecast Station can receive up to 3 outdoor
sensors: (TX142THv3 or TX142TH)
• When more than one sensor is used, set each sensor to a different
channel number then hold the CH button to search for the sensors.
View Channels: Press the CH button to select Ch1, Ch2, or Ch3
or auto-scroll channels.
Auto scroll-channel will show a circling arrow
channel number and will rotate through each channel
approximately every 3-5 seconds
• Remove battery covers from all sensors.
• Set each sensor to a different channel with the switch.
• Insert batteries into all sensors.
• Hold the CH button to search for sensors.
• Press the TX button on each sensor.
• After 15 minutes place, sensors in shaded locations.
Model: 308-1451

TEMPERATURE TREND ICONS

CHANNELS-AUTO SCROLL

ADD SENSORS

www.lacrossetechnology.com/support
below the
pg. 10

Advertisement

Table of Contents
loading

This manual is also suitable for:

308-1451

Table of Contents