Plantronics Voyager 510 User Manual page 21

PROBLEM
Receive sounds distorted.
Possible Cause
Speak volume is too high Reduce speak volume by changing the Tx Slide
Listen volume too high
on your telephone
PROBLEM
I can hear too much background conversation, noise or sidetone.
Possible Cause
Speak volume is too high Lower the speak volume by adjusting the Speak
PROBLEM
My handset Lifter operates every time I remove or replace my headset in the base unit.
Possible Cause
IntelliStand™ function
is enabled.
PROBLEM
Headset loses response to button presses
Headset needs a reset.
A hardware reset of the headset can be accomplished by a simultaneous
long press of the POWER/MUTE and SPEAK VOLUME DOWN keys.
Solution
Switch Setting as described on page 10.
If your telephone has a receive volume control,
lower this until the distortion disappears.
If the distortion is still present, lower the Listen
Volume Adjust Control on the headset. If the
distortion persists, select another Rx Slide Switch
setting as described on page 10.
Solution
Volume control on the base unit.
If the volume is still too high, select another Tx Slide
Switch Setting as described on page 10.
Solution
To disable the IntelliStand function move the
IntelliStand™ Switch to position I (Off).
20